Milwaukee vs. DeWalt vs. Makita: What to look for before buying power tools this Black Friday

“More Power!!!”

This has been Tim “The Tool Man” Taylor’s answer to every tool-related problem on Home Improvement. In one episode, when his assistant Al Borland was using a cordless drill on a deadbolt, Tim eyed the tool with the same disdain as a bodybuilder shows toward a five-pound dumbbell.
He called for Lisa, who brought in a large machine with a thick orange cord and a Binford 6100 label. Tim grabbed it with both hands and lets out his trademark grunt:
“Arr, arr, arr. Now that’s a drill.”
But Tim isn't the only one obsessed with a single feature of power tools. Plenty of DIYers make the same mistake when shopping. They chase higher torque and RPM, assuming more must mean better. That's like buying a race car to drive through a crowded parking lot.
One power tool owner learned how flawless that logic is:
“I got a DeWalt drill/impact driver… every time I take it out just isn't useful. It seems like it's way too powerful. It strips screw heads, destroys bits, and basically is either off, or on at the speed of light with no gradual speed control.”
The opposite problem can be just as frustrating. A tool that lacks sufficient power may struggle with tougher jobs, and pushing it beyond its limits can lead to damage.
Both mistakes happen for the same reason, which is not knowing what to look for when buying a power tool.
We’re here to clear up that confusion, so we’ve put together a list of factors to consider before you decide which power tools to buy this Black Friday.
Power is only useful if you can control it
Imagine a stove with only two settings: off or inferno. Everything you cook on it comes out either raw or burnt. The same happens when you put a high-power tool with no speed control to work on delicate tasks like installing shelves.
One drill owner was stuck with a tool with no self-control:
“After seeing so many people saying, 'drills are for drilling, drivers are for driving, ' I bought a small impact driver to go with my drill.
I can't see when I'd use it. Even with the torque adjusted to the lowest, it's far too powerful; it's ridiculously fast with very little control over speed, and it's too small to do any big bolts.”
Problems like this tend to happen when a buyer, swayed by what internet forums say, buys a tool without learning how its controls work.
This becomes even more important with saws, where control also affects safety. A saw's power is only useful if its brake stops the blade when you release the trigger. You may know what a drill or a saw is for, but not how smoothly this model’s trigger ramps up or how finely it lets you adjust torque.

If possible, visit a nearby store and inspect the tool yourself. Squeeze the trigger slowly, as you would when driving a screw halfway in, and see whether the speed builds smoothly.
Once you’ve tested the controls, the next step is making sure the tool can be used for long hours of work.
Comfort is a spec less talked about
A larger battery gives a power tool more runtime, but it also adds weight, sometimes several pounds. If the tool isn’t balanced to carry that extra weight, holding it for long stretches becomes more tiring than the task itself.

That’s why you should look for a well-balanced tool, one that keeps its centre of gravity within or close to the handle, so the weight sits in your hand and not out in front of it. When you test one, notice whether you keep having to correct its position because the front or the battery end feels too heavy.
The grip matters just as much. One DIYer highlighted this nuance when comparing tools from different brands:
“The guy I’m working with has Ryobi and another guy has Milwaukee. Clearly both those companies make good tools, but I’m shocked at how much better the Makita tools feel in my hands, the grip is slimmer and just fits right to the shape of my hands. The handholds on drills from the other companies feel fat and chunky even though I have big hands.”
So having bigger hands doesn't automatically mean you need a thicker grip. A comfortable power grip generally measures 30 to 50 mm across, or about 1.25 to 2 inches. The handle should also be at least 4 inches long, with extra length if you work in gloves.
But sometimes the tools that fit in your hands also leave it exposed to danger.
A brand logo is not a guard
Two grinders from the same brand can carry the same Black Friday discount, yet only one may come with the guard you need for cutting. That’s because safety depends on the kind of power tool you buy and the safety accessory needed to work with it.
For instance, when using a cut-off wheel, Milwaukee’s manual mandates a Type 1 guard. Its 2986-20 comes with both a standard Type 27 guard and a Type 1 guard. If a cheaper bundle includes only one, you will have to factor in the cost of buying the other separately.

The wheel itself needs checking, too. Its speed rating must match or exceed the speed marked on the grinder's nameplate. Using a worn wheel from a bigger grinder on a smaller, faster one can cause it to burst.
Next, check the exact model number rather than relying on the product family name. Safety features aren't necessarily shared across every model. For instance, Milwaukee describes AUTOSTOP kickback control on the 2986-20 as a first for its grinders. It also says the brake stops “most wheels” in under a second. But don't assume another grinder from the same brand offers the same protection. Always check the parts and specifications listed on the specific product page. Plus, in case of doubt double check with the retailer’s support team.
A guard protects you from the tool, but what protects you when the tool itself gives out?
When it breaks, who fixes it?
Every power tool company offers protection for its tools in the form of a manufacturer’s warranty. But before you breathe a sigh of relief, read what this owner was told when he filed a claim:
“I purchased an XR 20V drill last May… I have attempted to get a warranty claim… I keep getting endless back-and-forth between the main support line and repair facilities. Everyone has been nice, but I am no closer to a solution. Last response was that this is not a warranty type of claim and would be a normal paid for repair. I'm not going to spend $100 to repair.”
Notice that he was told this isn’t a warranty claim. That’s because a manufacturer’s warranty covers only defects in materials or workmanship. Makita’s terms make it clear that a problem counts as a defect only “if inspection shows” that’s the cause. For anything outside it, you’ll either be handed a repair bill or shown the door.
So before you trust a warranty, let’s see what Makita, DeWalt and Milwaukee offer in their warranty terms:
But you’ve already seen how little the number of years tells you, so now it’s time to look at what you’ll be paying for.
What the warranty leaves out
The easiest way to void your warranty is to open the tool and try the fix yourself, because all three makers refuse to cover damage from repairs made or attempted by others. They also leave out normal wear, with Milwaukee naming chucks and brushes, so a worn-out part is yours to replace even when the tool is still under warranty.
Here is what else these brands exclude from coverage, beyond those two exclusions:
After the manufacturer’s warranty
You can research every spec and look after your tools like your kids, but one of them will still break someday. When it does, finding a repair shop you trust and comparing quotes is a project of its own.
An extended warranty takes that legwork off your hands once the manufacturer’s term ends. SureBright Anywhere extends your protection against mechanical and electrical breakdowns, including those caused by normal wear and power surges. You file the claim online, and SureBright arranges the repair through its network of 3 thousand plus repair partners, so there is no shop to hunt for and no quote to haggle over. If the tool can’t be repaired economically, you get a replacement or reimbursement.
You can also keep your receipts and other details in the Warranty Vault, so the claim starts with everything in one place. On top of that, you have the flexibility to add extended protection within 90 days of purchase, whichever retailer you bought from.
So don’t let a breakdown burn through your savings. Protect your tools with SureBright Anywhere.

Author
Pushpender
Pushpender enjoys exploring the stories behind everyday decisions. He writes about warranties, ecommerce, and the psychology of buying. He draws on internet research, lively conversations, and a curiosity for the details most people overlook. With a background in English Literature, he believes good writing isn't measured by how complex it sounds, but by how effortlessly it helps someone understand a complex idea.
Recent Blogs

Shark vacuum warranty: What the 5-year warranty covers, and where you’re left paying the repair bills
12 October 2026

Avoid buyer’s regret when purchasing from Walmart- protect your products long after checkout
29 October 2026

Which Microwave Brand Has the Best Warranty? A Coverage Comparison Across GE Appliances, LG, Samsung, Whirlpool & More
13 August 2026

Best appliance warranty for Cyber Week 2026: How to protect your holiday deal long after the sale
21 October 2026
