SureBright AnywhereAre you a merchant?

Bradford White warranty: 6-10 years of coverage, what’s excluded, and who pays when repairs are needed?

Bradford White’s 6–10-year warranty sounds reassuring, but what does it actually cover? Find out what’s excluded, when repairs may cost you, and what happens when coverage ends.

See details

Check you water heater coverage

Water heater, tank, or parts? See what your warranty covers and excludes

Incident typeCovered by Bradford White?
Manufacturing defectsYes, during applicable warranty period
Mechanical/electricalPartly, when caused by a defect
Accidental drops & impact damageNo
Liquid/spill damageNo
Power surgesNo
Wear & agingNo
Unauthorized repair/service Not covered
Bought from a third-party retailerAuthorized sellers only

Want more comprehensive protection for your device?

Water heater repair costs after your warranty expires

T&P relief valve
$100- $300
Heating element
$200 – $300
Thermostat
$150 – $200+
Pilot light
$50 - $200

The more expensive a heater, the more a repair can hurt

Check your warranty status and request a repair

Enter your water heater’s serial number in Bradford White’s Warranty Center to check your warranty status.

Check you warranty terms and arrange a repair

Bradford White warranty status

  1. 1. Check your status using the Warranty Center.
  2. 2. Contact your installer or a qualified professional for diagnosis.
  3. 3. Submit a warranty claim through your local distributor.

Residential water heaters

On most Bradford White water heaters, the serial number is on the rating plate on the unit; on tankless models, it is on the left side of the cover when facing the appliance.

What Bradford White users say about warranty

tvanore

Today Im changing out a 2 year old Bradford white 30 gallon. Tank ruptured and leaks down the side.. my supply house informed me that replacement will be $304 because Bradford is only reimbursing at the price we paid for it originally….

u/Sharp-Try-5551

Situation is my 50 gallon gas Bradford White water heater died a couple weeks ago. It was still under warranty. It was intalled by my gas company 5 years ago because its is a combo system (Radiant Floor & Tap) on a very small house. New Bradford wasn’t available for two weeks so they got a 40 gallon Rheem pro and installed within a few days, but then all the trouble started and we aren’t out of the woods yet.
Rundown:
Saturday: Called the company $275 emergency call on weekend because Bradford fan was not well, making noises. Nothing they could do because opening it up voided warranty and said it was plug and play. Worst case fan breaks and no hot water, but they would order and get new unit it Monday/Tuesday. Took pics. Discussed either repair or replace TBD.
Sunday: Tank starts leaking. Fan still running. Caught it early. Drained it and informed them we are now in replace mode.
Monday: $175 service call by different tech to take pics and put the job together. Later that day discussed replacing with Rheem because Bradford replacement was 2 weeks out. Paid $1400 downpayment. Warned it might be $2000 even without the heater cost just in parts and labor. This is just after the big snowstorm a couple weeks ago.
Tuesday: 2 guys arrive and work solid 5 hours redoing the piping and exhaust to fit the Rheem with different dimensions. The Rheem does not fire up. Lots of back and forth with the Rheem. Rheem decides to FedEx a new ignition assembly. That gets stuck in FedEx because of the ice storm 5 days. No hot water. Heating house with space heaters.
Tuesday +7: Install new ignition assembly. Does not fire up. Lots of back and forth. Turns out the sensor on the bottom below the ignition simply wasn’t crimped right during the manufacturing process. Crimp. Runs fine. Could have had hot water and heat for a week probably if that was the only issue. Rheem could have also saved $ by not FedExing a part I probably didn’t need. Now I have a spare.
Tuesday +7: Problem is - shower and taps are lukewarm. Pressure in system is 50PSI. Play around with mixing valve and set it to max. Doesn’t change much, need it at 6/7/Max to just get Lukewarm running straight hot water (tried all taps). Did a bunch of experiments and if heat circulation pump is running tap runs hot normal. If pump is off, tap is lukewarm. Maybe there needs to be a spring valve somewhere in there? Somehow cold is getting into the hot? But don’t see how that is possible except with the mixing valve.
Sent a recap to company, said maybe I’d rather have that Bradford. They are trying to get a Rheem rep to review the situation. Tomorrow will be +14 days in total.

u/bidyut_jsr

Our water heater was pretty old and broke down in March this year. Home warranty(American home shield) covered the whole replacement with a new Bradford white water heater. All good! Come this June 15, a bit of water started leaking from the tank. Called home warranty to ask someone to check, they said that they won’t service any request for water heater(seems like replacement exhausts that appliance’s service) till I renew again at the end of year. A week later, it’s stopped heating and there water in the drain pan. A local plumber said it might be a manufacturing defect. I called Bradford , they said they would be able to replace it if there’s an issue with the tank since it’s under 6 years warranty but won’t be responsible for installation fees which would be around $800-90

u/dogwalker375

Three years ago, I had a Tankless hot water heater installed. Right from the get-go I didn’t like it because it took so much longer to get hot water. The plumber returned and installed the small electric unit that you see in the pic.
At the beginning, the tankless unit was OK but very shortly it intermittently started flashing a C2 error code. For many many months we were able to shut the unit off and restart it which did the trick to return hot water.
We’ve had the unit flushed once.
The issue now is that the C2 error code flashes almost constantly. Once in a while, we’re able to reset by shutting it off and turning it on, but for the most part, we’re not able to get hot water out of this thing. If you take a VERY short shower, the little white electric heater will do ok.
Re my despised unit, I spoke with Bradford White, who said that under warranty we can get a new unit at no cost. The replacement unit would be one of these: RTGR199N1 or rTGS199N1. I have no clue what the difference is between these two units

u/Trevanon3030

I had the gas control valve fail on my 2010 Bradford White 50 gallon water heater right before a major snow storm (I live in the Midwest). I call a chain plumber because that’s the sticker on the heater and even though I think they’re crooks, it’s right before a blizzard and I’m worried I’m out of options. Guy comes out, quotes me $500+ to attempt to fix it here or $3200 to replace the water heater completely.
He tells me they don’t have the part and that it takes a lot to get things from Bradford White. I say replace the part, thinking that means he’ll order a replacement. Instead, he takes the old piece off, shows me how blown out the threads are on the gas control valve, and then hits it with some teflon tape and thread paste and shockingly, it doesn’t work. He tells me even ordering the part won’t guarantee it’ll work And that it’ll be an extra $200, bring me up to $700. He then tells me that most water heaters crap out at around a decade anyway and even if we replace the control valve, it might buy a couple more years on this unit. So my choices are basically $700 for a maybe or $3200 for a definite fix.
I cave and say, let’s do the replacement and he says OK. My girlfriend is around for all of this and google water heaters and comes away with some cheaper options with pretty solid performance ratings, and warranties from recognized brands. As the guy’s leaving he says, “Oh, we install other units, but you don’t get the white glove warranty, if we do that.”

tvanore

Today Im changing out a 2 year old Bradford white 30 gallon. Tank ruptured and leaks down the side.. my supply house informed me that replacement will be $304 because Bradford is only reimbursing at the price we paid for it originally….

u/Sharp-Try-5551

Situation is my 50 gallon gas Bradford White water heater died a couple weeks ago. It was still under warranty. It was intalled by my gas company 5 years ago because its is a combo system (Radiant Floor & Tap) on a very small house. New Bradford wasn’t available for two weeks so they got a 40 gallon Rheem pro and installed within a few days, but then all the trouble started and we aren’t out of the woods yet.
Rundown:
Saturday: Called the company $275 emergency call on weekend because Bradford fan was not well, making noises. Nothing they could do because opening it up voided warranty and said it was plug and play. Worst case fan breaks and no hot water, but they would order and get new unit it Monday/Tuesday. Took pics. Discussed either repair or replace TBD.
Sunday: Tank starts leaking. Fan still running. Caught it early. Drained it and informed them we are now in replace mode.
Monday: $175 service call by different tech to take pics and put the job together. Later that day discussed replacing with Rheem because Bradford replacement was 2 weeks out. Paid $1400 downpayment. Warned it might be $2000 even without the heater cost just in parts and labor. This is just after the big snowstorm a couple weeks ago.
Tuesday: 2 guys arrive and work solid 5 hours redoing the piping and exhaust to fit the Rheem with different dimensions. The Rheem does not fire up. Lots of back and forth with the Rheem. Rheem decides to FedEx a new ignition assembly. That gets stuck in FedEx because of the ice storm 5 days. No hot water. Heating house with space heaters.
Tuesday +7: Install new ignition assembly. Does not fire up. Lots of back and forth. Turns out the sensor on the bottom below the ignition simply wasn’t crimped right during the manufacturing process. Crimp. Runs fine. Could have had hot water and heat for a week probably if that was the only issue. Rheem could have also saved $ by not FedExing a part I probably didn’t need. Now I have a spare.
Tuesday +7: Problem is - shower and taps are lukewarm. Pressure in system is 50PSI. Play around with mixing valve and set it to max. Doesn’t change much, need it at 6/7/Max to just get Lukewarm running straight hot water (tried all taps). Did a bunch of experiments and if heat circulation pump is running tap runs hot normal. If pump is off, tap is lukewarm. Maybe there needs to be a spring valve somewhere in there? Somehow cold is getting into the hot? But don’t see how that is possible except with the mixing valve.
Sent a recap to company, said maybe I’d rather have that Bradford. They are trying to get a Rheem rep to review the situation. Tomorrow will be +14 days in total.

u/bidyut_jsr

Our water heater was pretty old and broke down in March this year. Home warranty(American home shield) covered the whole replacement with a new Bradford white water heater. All good! Come this June 15, a bit of water started leaking from the tank. Called home warranty to ask someone to check, they said that they won’t service any request for water heater(seems like replacement exhausts that appliance’s service) till I renew again at the end of year. A week later, it’s stopped heating and there water in the drain pan. A local plumber said it might be a manufacturing defect. I called Bradford , they said they would be able to replace it if there’s an issue with the tank since it’s under 6 years warranty but won’t be responsible for installation fees which would be around $800-90

u/dogwalker375

Three years ago, I had a Tankless hot water heater installed. Right from the get-go I didn’t like it because it took so much longer to get hot water. The plumber returned and installed the small electric unit that you see in the pic.
At the beginning, the tankless unit was OK but very shortly it intermittently started flashing a C2 error code. For many many months we were able to shut the unit off and restart it which did the trick to return hot water.
We’ve had the unit flushed once.
The issue now is that the C2 error code flashes almost constantly. Once in a while, we’re able to reset by shutting it off and turning it on, but for the most part, we’re not able to get hot water out of this thing. If you take a VERY short shower, the little white electric heater will do ok.
Re my despised unit, I spoke with Bradford White, who said that under warranty we can get a new unit at no cost. The replacement unit would be one of these: RTGR199N1 or rTGS199N1. I have no clue what the difference is between these two units

u/Trevanon3030

I had the gas control valve fail on my 2010 Bradford White 50 gallon water heater right before a major snow storm (I live in the Midwest). I call a chain plumber because that’s the sticker on the heater and even though I think they’re crooks, it’s right before a blizzard and I’m worried I’m out of options. Guy comes out, quotes me $500+ to attempt to fix it here or $3200 to replace the water heater completely.
He tells me they don’t have the part and that it takes a lot to get things from Bradford White. I say replace the part, thinking that means he’ll order a replacement. Instead, he takes the old piece off, shows me how blown out the threads are on the gas control valve, and then hits it with some teflon tape and thread paste and shockingly, it doesn’t work. He tells me even ordering the part won’t guarantee it’ll work And that it’ll be an extra $200, bring me up to $700. He then tells me that most water heaters crap out at around a decade anyway and even if we replace the control valve, it might buy a couple more years on this unit. So my choices are basically $700 for a maybe or $3200 for a definite fix.
I cave and say, let’s do the replacement and he says OK. My girlfriend is around for all of this and google water heaters and comes away with some cheaper options with pretty solid performance ratings, and warranties from recognized brands. As the guy’s leaving he says, “Oh, we install other units, but you don’t get the white glove warranty, if we do that.”

u/bidyut_jsr

Our water heater was pretty old and broke down in March this year. Home warranty(American home shield) covered the whole replacement with a new Bradford white water heater. All good! Come this June 15, a bit of water started leaking from the tank. Called home warranty to ask someone to check, they said that they won’t service any request for water heater(seems like replacement exhausts that appliance’s service) till I renew again at the end of year. A week later, it’s stopped heating and there water in the drain pan. A local plumber said it might be a manufacturing defect. I called Bradford , they said they would be able to replace it if there’s an issue with the tank since it’s under 6 years warranty but won’t be responsible for installation fees which would be around $800-90

u/dogwalker375

Three years ago, I had a Tankless hot water heater installed. Right from the get-go I didn’t like it because it took so much longer to get hot water. The plumber returned and installed the small electric unit that you see in the pic.
At the beginning, the tankless unit was OK but very shortly it intermittently started flashing a C2 error code. For many many months we were able to shut the unit off and restart it which did the trick to return hot water.
We’ve had the unit flushed once.
The issue now is that the C2 error code flashes almost constantly. Once in a while, we’re able to reset by shutting it off and turning it on, but for the most part, we’re not able to get hot water out of this thing. If you take a VERY short shower, the little white electric heater will do ok.
Re my despised unit, I spoke with Bradford White, who said that under warranty we can get a new unit at no cost. The replacement unit would be one of these: RTGR199N1 or rTGS199N1. I have no clue what the difference is between these two units

u/Trevanon3030

I had the gas control valve fail on my 2010 Bradford White 50 gallon water heater right before a major snow storm (I live in the Midwest). I call a chain plumber because that’s the sticker on the heater and even though I think they’re crooks, it’s right before a blizzard and I’m worried I’m out of options. Guy comes out, quotes me $500+ to attempt to fix it here or $3200 to replace the water heater completely.
He tells me they don’t have the part and that it takes a lot to get things from Bradford White. I say replace the part, thinking that means he’ll order a replacement. Instead, he takes the old piece off, shows me how blown out the threads are on the gas control valve, and then hits it with some teflon tape and thread paste and shockingly, it doesn’t work. He tells me even ordering the part won’t guarantee it’ll work And that it’ll be an extra $200, bring me up to $700. He then tells me that most water heaters crap out at around a decade anyway and even if we replace the control valve, it might buy a couple more years on this unit. So my choices are basically $700 for a maybe or $3200 for a definite fix.
I cave and say, let’s do the replacement and he says OK. My girlfriend is around for all of this and google water heaters and comes away with some cheaper options with pretty solid performance ratings, and warranties from recognized brands. As the guy’s leaving he says, “Oh, we install other units, but you don’t get the white glove warranty, if we do that.”

tvanore

Today Im changing out a 2 year old Bradford white 30 gallon. Tank ruptured and leaks down the side.. my supply house informed me that replacement will be $304 because Bradford is only reimbursing at the price we paid for it originally….

u/Sharp-Try-5551

Situation is my 50 gallon gas Bradford White water heater died a couple weeks ago. It was still under warranty. It was intalled by my gas company 5 years ago because its is a combo system (Radiant Floor & Tap) on a very small house. New Bradford wasn’t available for two weeks so they got a 40 gallon Rheem pro and installed within a few days, but then all the trouble started and we aren’t out of the woods yet.
Rundown:
Saturday: Called the company $275 emergency call on weekend because Bradford fan was not well, making noises. Nothing they could do because opening it up voided warranty and said it was plug and play. Worst case fan breaks and no hot water, but they would order and get new unit it Monday/Tuesday. Took pics. Discussed either repair or replace TBD.
Sunday: Tank starts leaking. Fan still running. Caught it early. Drained it and informed them we are now in replace mode.
Monday: $175 service call by different tech to take pics and put the job together. Later that day discussed replacing with Rheem because Bradford replacement was 2 weeks out. Paid $1400 downpayment. Warned it might be $2000 even without the heater cost just in parts and labor. This is just after the big snowstorm a couple weeks ago.
Tuesday: 2 guys arrive and work solid 5 hours redoing the piping and exhaust to fit the Rheem with different dimensions. The Rheem does not fire up. Lots of back and forth with the Rheem. Rheem decides to FedEx a new ignition assembly. That gets stuck in FedEx because of the ice storm 5 days. No hot water. Heating house with space heaters.
Tuesday +7: Install new ignition assembly. Does not fire up. Lots of back and forth. Turns out the sensor on the bottom below the ignition simply wasn’t crimped right during the manufacturing process. Crimp. Runs fine. Could have had hot water and heat for a week probably if that was the only issue. Rheem could have also saved $ by not FedExing a part I probably didn’t need. Now I have a spare.
Tuesday +7: Problem is - shower and taps are lukewarm. Pressure in system is 50PSI. Play around with mixing valve and set it to max. Doesn’t change much, need it at 6/7/Max to just get Lukewarm running straight hot water (tried all taps). Did a bunch of experiments and if heat circulation pump is running tap runs hot normal. If pump is off, tap is lukewarm. Maybe there needs to be a spring valve somewhere in there? Somehow cold is getting into the hot? But don’t see how that is possible except with the mixing valve.
Sent a recap to company, said maybe I’d rather have that Bradford. They are trying to get a Rheem rep to review the situation. Tomorrow will be +14 days in total.

u/bidyut_jsr

Our water heater was pretty old and broke down in March this year. Home warranty(American home shield) covered the whole replacement with a new Bradford white water heater. All good! Come this June 15, a bit of water started leaking from the tank. Called home warranty to ask someone to check, they said that they won’t service any request for water heater(seems like replacement exhausts that appliance’s service) till I renew again at the end of year. A week later, it’s stopped heating and there water in the drain pan. A local plumber said it might be a manufacturing defect. I called Bradford , they said they would be able to replace it if there’s an issue with the tank since it’s under 6 years warranty but won’t be responsible for installation fees which would be around $800-90

u/dogwalker375

Three years ago, I had a Tankless hot water heater installed. Right from the get-go I didn’t like it because it took so much longer to get hot water. The plumber returned and installed the small electric unit that you see in the pic.
At the beginning, the tankless unit was OK but very shortly it intermittently started flashing a C2 error code. For many many months we were able to shut the unit off and restart it which did the trick to return hot water.
We’ve had the unit flushed once.
The issue now is that the C2 error code flashes almost constantly. Once in a while, we’re able to reset by shutting it off and turning it on, but for the most part, we’re not able to get hot water out of this thing. If you take a VERY short shower, the little white electric heater will do ok.
Re my despised unit, I spoke with Bradford White, who said that under warranty we can get a new unit at no cost. The replacement unit would be one of these: RTGR199N1 or rTGS199N1. I have no clue what the difference is between these two units

u/Trevanon3030

I had the gas control valve fail on my 2010 Bradford White 50 gallon water heater right before a major snow storm (I live in the Midwest). I call a chain plumber because that’s the sticker on the heater and even though I think they’re crooks, it’s right before a blizzard and I’m worried I’m out of options. Guy comes out, quotes me $500+ to attempt to fix it here or $3200 to replace the water heater completely.
He tells me they don’t have the part and that it takes a lot to get things from Bradford White. I say replace the part, thinking that means he’ll order a replacement. Instead, he takes the old piece off, shows me how blown out the threads are on the gas control valve, and then hits it with some teflon tape and thread paste and shockingly, it doesn’t work. He tells me even ordering the part won’t guarantee it’ll work And that it’ll be an extra $200, bring me up to $700. He then tells me that most water heaters crap out at around a decade anyway and even if we replace the control valve, it might buy a couple more years on this unit. So my choices are basically $700 for a maybe or $3200 for a definite fix.
I cave and say, let’s do the replacement and he says OK. My girlfriend is around for all of this and google water heaters and comes away with some cheaper options with pretty solid performance ratings, and warranties from recognized brands. As the guy’s leaving he says, “Oh, we install other units, but you don’t get the white glove warranty, if we do that.”

tvanore

Today Im changing out a 2 year old Bradford white 30 gallon. Tank ruptured and leaks down the side.. my supply house informed me that replacement will be $304 because Bradford is only reimbursing at the price we paid for it originally….

u/Sharp-Try-5551

Situation is my 50 gallon gas Bradford White water heater died a couple weeks ago. It was still under warranty. It was intalled by my gas company 5 years ago because its is a combo system (Radiant Floor & Tap) on a very small house. New Bradford wasn’t available for two weeks so they got a 40 gallon Rheem pro and installed within a few days, but then all the trouble started and we aren’t out of the woods yet.
Rundown:
Saturday: Called the company $275 emergency call on weekend because Bradford fan was not well, making noises. Nothing they could do because opening it up voided warranty and said it was plug and play. Worst case fan breaks and no hot water, but they would order and get new unit it Monday/Tuesday. Took pics. Discussed either repair or replace TBD.
Sunday: Tank starts leaking. Fan still running. Caught it early. Drained it and informed them we are now in replace mode.
Monday: $175 service call by different tech to take pics and put the job together. Later that day discussed replacing with Rheem because Bradford replacement was 2 weeks out. Paid $1400 downpayment. Warned it might be $2000 even without the heater cost just in parts and labor. This is just after the big snowstorm a couple weeks ago.
Tuesday: 2 guys arrive and work solid 5 hours redoing the piping and exhaust to fit the Rheem with different dimensions. The Rheem does not fire up. Lots of back and forth with the Rheem. Rheem decides to FedEx a new ignition assembly. That gets stuck in FedEx because of the ice storm 5 days. No hot water. Heating house with space heaters.
Tuesday +7: Install new ignition assembly. Does not fire up. Lots of back and forth. Turns out the sensor on the bottom below the ignition simply wasn’t crimped right during the manufacturing process. Crimp. Runs fine. Could have had hot water and heat for a week probably if that was the only issue. Rheem could have also saved $ by not FedExing a part I probably didn’t need. Now I have a spare.
Tuesday +7: Problem is - shower and taps are lukewarm. Pressure in system is 50PSI. Play around with mixing valve and set it to max. Doesn’t change much, need it at 6/7/Max to just get Lukewarm running straight hot water (tried all taps). Did a bunch of experiments and if heat circulation pump is running tap runs hot normal. If pump is off, tap is lukewarm. Maybe there needs to be a spring valve somewhere in there? Somehow cold is getting into the hot? But don’t see how that is possible except with the mixing valve.
Sent a recap to company, said maybe I’d rather have that Bradford. They are trying to get a Rheem rep to review the situation. Tomorrow will be +14 days in total.

Protection for your winter shower essential

Don't let a breakdown freeze your water heater

5 Star Rating

500+

Brand partners

200K

Customers

< 2

Minutes to file a claim

Common questions, helpful answers

How long is the Bradford White warranty?

For residential models, tank coverage ranges from 1 to 10 years, depending on the model. Parts are generally covered for 6 years. Check your model and serial number to confirm the exact warranty term.

How do I check my warranty status or find my serial number?

Enter your water heater’s serial number in the Bradford White Warranty Center to check its warranty status. You’ll find the model and serial numbers on the rating plate attached to the unit.

Does the warranty cover accidental damage?

No. Accidental or other exterior damage is excluded. The warranty covers tank leaks and component malfunctions caused by defects in materials or workmanship.

Does the warranty transfer if I sell the water heater or buy it used?

Yes, the warranty can transfer to subsequent owners, provided the water heater remains at its original installation location. Moving it to a different location may void the warranty. Check the official warranty terms for the conditions that apply.

Is a product covered if I bought it from a marketplace seller?

Buy through authorized channels only. The company states that unauthorized parties and websites are not authorized to sell its products and that it does not cover products sold through them.

Do I need to register my product for the warranty to apply?

Registration is not listed as a warranty requirement in the official terms. However, registering your water heater can make filing a claim smoother by keeping your product details on record. Keep your receipt and installation records as well.

Does the warranty cover liquid damage?

Liquid damage is not listed as a separate exclusion. Coverage applies to leaks or malfunctions caused by defects in materials or workmanship; damage caused by misuse or accidental exterior damage is excluded.

What proof of purchase do I need, and what if I lost the receipt?

Keep your bill of sale or receipt as proof of installation. If you’ve lost it, contact your installer for installation records. Without proof of installation, the warranty period starts three months after the manufacture date.

How long does a repair take, and is it mail-in or carry-in?

Repair times vary depending on the issue and service availability. The warranty doesn’t specify a standard turnaround time or whether repairs are mail-in or carry-in. Contact your installer or a qualified service professional to arrange an inspection and repair.

What can I do if my warranty claim is denied?

If your warranty claim is denied, ask for the reason in writing and check whether it relates to an excluded issue, an expired warranty, an unauthorized seller, or missing proof of purchase. Review your rights under the Magnuson-Moss Warranty Act and, if the issue remains unresolved, contact your state consumer-protection office or the FTC. You can also contact Bradford White’s Warranty Support Group at 800-531-2111 or warranty@bradfordwhite.com.

What are my options once the warranty ends?

Once your manufacturer’s warranty expires, you can pay for repairs out of pocket or choose a SureBright protection plan for continued protection against covered mechanical and electrical failures, power surges, and other issues specified in the plan terms.

View all

Covers all the major brands you trust

Stiebel
State
Rinnai
Rheem
Noritz
Navien
Ecosmart
AO Smith

Protect your Bradford White